|
|
|
Common
Reference
|
Method
|
|
ASTM
|
D1119
|
Ash Content
|
Ash Content of Engine Coolants and
Antirusts
|
|
ASTM
|
D1120
|
Boiling Point
|
Boiling Point of Engine Coolants
|
|
ASTM
|
D1120
|
Boiling Point: 50%
|
Boiling Point of Engine Coolants
|
|
ASTM
|
D1121
|
Reserve Alkalinity
|
Reserve Alkalinity of Engine
Coolants and Antirusts
|
|
ASTM
|
D1122
|
Specific
Gravity
|
Specific
Gravity of Engine Coolant Concentrates and
Engine Coolants by The Hydrometer
|
|
ASTM
|
D1123
|
Water
%: by Karl
Fischer Method
|
Water
in Engine Coolant Concentrate by the Karl
Fischer Reagent Method
|
|
ASTM |
D1126 |
Hardness in Water |
Hardness in Water |
|
ASTM
|
D1177
|
Freeze Point
|
Freezing Point of Aqueous Engine
Coolants
|
|
ASTM
|
D1287
|
pH at 50% (v/v)
|
pH of Engine Coolants and Antirusts
|
|
ASTM |
D1293 |
pH of Water |
pH of Water |
|
ASTM
|
D1384
|
Corrosion in Glassware
|
Corrosion Test for Engine Coolants
in Glassware
|
|
ASTM
|
D1881
|
Foaming Tendencies
|
Foaming Tendencies of Engine
Coolants in Glassware
|
|
ASTM
|
D1882
|
Auto
Finish Effect;
Surface Finish
|
Effect
of Cooling System Chemical Solutions on
Organic Finishes for
Automotive Vehicles
|
|
ASTM
|
D2570
|
Simulated Service
|
Simulated Service Corrosion Testing
of Engine Coolants
|
|
ASTM
|
D2809
|
Cavitation, Pump Cavitation
|
Cavitation
Corrosion and Erosion-Corrosion
Characteristics of Aluminum
Pumps With
Engine Coolants
|
|
ASTM
|
D3147
|
Coolant Stop Leak
Test Machine
|
Testing
Stop-Leak Additives for Engine Coolants
|
|
ASTM
|
D3306
|
Specification for Ethylene Glycol
Base Engine Coolants
|
Specification
for Ethylene Glycol Base Engine Coolant For Automotive and Light Duty
Service
|
|
ASTM
|
D3321
|
Stop Leak Performance
|
Standard
Specification for Stop-Leak Additive for
Engine Coolants Used in Light Duty Service
|
|
ASTM |
D3321 |
Refractometer
for Field Test Determination of the Freezing Point of Aqueous Engine
Coolants |
Refractometer
for Field Test Determination of the Freezing Point of Aqueous Engine
Coolants |
|
ASTM
|
D3634
|
Chloride: titration, Trace Chloride
|
Trace
Chloride Ion in Engine Coolants
|
|
ASTM |
D4327 |
Anions in Water
by Ion Chromatography |
Anions
in Water by Ion Chromatography |
|
ASTM
|
D4340
|
Corrosion of Cast Al @ Hot Surface
|
Corrosion
of Cast Aluminum Alloys in Engine Coolants under Heat-Rejecting Conditions
|
|
ASTM |
D4985 |
Low
Silicate Ethylenents |
Standard
Specification for Low Silicate Ethylene Glycol Base Engine Coolant for
Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive
(SCA)
|
| |
|
|
|
|
ASTM
|
D6107
|
Stop Leak Performance
|
Standard
Specification for Stop-Leak Additive for
Engine Coolants Used in Light Duty Service
|
|
ASTM
|
E202
|
GC/MS Glycols
|
Analysis of Ethylene Glycols and
Propylene Glycols
|
|
|
|
|
|
|
Caterpillar |
EC-1 |
Minimum requirements of a long life
engine coolant and coolant extender intended for use in Caterpillar
engines. |
Caterpillar's
industry specification for an extended service, or long life coolant.
[A 300,000-mile extended service fleet test.] |
| |
|
|
|
|
EPA
|
218.6
|
Chromium VI
|
Chromium,
Dissolved Hexavalent by Ion
Chromatograph
|
|
EPA
|
300.0
|
Anions
|
Inorganic
Anions by Ion Chromatography
|
|
EPA
|
310.1
|
Alkalinity
|
Alkalinity - Colorimetric Automatic
|
|
EPA
|
340.2
|
Fluoride
|
Fluoride - Potentiometric
|
|
EPA
|
350.3
|
Nitrogen Ammonia
|
Nitrogen Ammonia - Potentiometric
|
|
EPA
|
376.1
|
Sulfide
|
Sulfide - Titrimetric Iodine
|
|
EPA
|
524.2/624
|
Volatile Organics
|
VOCs - Purge & Trap / Capillary
Column GC/MS
|