|
Method |
ASTM
Description |
Common
Reference |
|
ASTM
D56 |
Flash
Point by Tag Closed Tester |
Tag
Closed Cup Flash |
|
ASTM
D86 |
Distillation
of Petroleum Products at Atmospheric Pressure |
Atmospheric
Distillation of Petroleum Products (Gasoline) (Fuel Oils) |
|
ASTM
D87 |
Melting
Point of Petroleum Wax (Cooling Curve) |
Melting
Point of Wax |
|
ASTM
D91 |
Precipitation
Number of Lubricating Oils |
Precipitation
Number of Lubricating Oils |
|
ASTM
D92 |
Flash
and Fire Points by Cleveland Open Cup Tester |
Flash
Point, COC / Fire Point. COC |
|
ASTM
D93 |
Flash-Point
by Pensky-Martens Closed Cup Tester |
Pensky-Marten
Flash Point, Flash Point PM / Pensky-Marten Fire Point, Fire Point PM |
|
ASTM
D94 |
Saponification
Number of Petroleum Products |
Saponification
Number of Petroleum Products |
|
ASTM
D95 |
Water
in Petroleum Products and Bituminous Materials by Distillation |
Water
by Distillation, Water Content by Distillation |
|
ASTM
D96 |
Test
Methods for Water and Sediment in Crude Oil by Centrifuge Method (Field
Procedure) |
Percent
Sediment, Brine, Sediment and Water |
|
ASTM
D97 |
Pour
Point of Petroleum Products |
Pour
Point - Fuels / Pour Point -
Oils |
|
ASTM
D127 |
Drop
Melting Point of Petroleum Wax including Petrolatum |
Drop
Melting Point, Melting Point of Wax, Dropping Point |
|
ASTM
D128 |
Analysis
of Lubricating Grease |
Analysis
of Lubricating Grease |
|
ASTM
D129 |
Sulfur
in Petroleum Product (General Bomb Method) |
Sulfur
in Petroleum Product (General Bomb Method) |
|
ASTM
D130 |
Detection
of Copper Corrosion from Petroleum Products by the Copper Strip Tarnish
Test |
Copper
Corrosion |
|
ASTM
D156 |
Saybolt
Color of Petroleum Products (Saybolt Chromometer Method) |
Color-Saybolt;
Saybolt Color, Color by Saybolt method |
|
ASTM
D189 |
Conradson
Carbon Residue of Petroleum Products |
Conradson
Carbon; Conradson Carbon Residue |
|
ASTM
D217 |
Cone
Penetration of Lubricating Grease |
Full
Scale Cone Penetration |
|
ASTM
D240 |
Heat
of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter |
Heat
of Combustion of Liquid Hydrocarbon Fuels |
|
ASTM
D287 |
API
Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method) |
API
Gravity, Specific Gravity, Density |
|
ASTM
D322 |
Gasoline
Diluent in Used Gasoline Engine Oils by Distillation |
Fuel
Dilution by Distillation |
|
ASTM
D323 |
Vapor
Pressure of Petroleum Products (Reid Method) |
Reid
Vapor Pressure |
|
ASTM
D381 |
Gum
Content in Fuels by Jet Evaporation |
Gum
Content in Fuels by Jet Evaporation |
|
ASTM
D396 |
Standard
Specification for Fuel Oils |
Fuel
Oils Specification |
|
ASTM
D439 |
Specification
for Automotive Spark-Ignition Engine Fuel [Replaced ASTM D439 with ASTM
D4814] |
Anti-Knock
Index (R+M)/2 Octane |
|
ASTM
D445 |
Kinematic
Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic
Viscosity) |
Kinematic
Viscosity at Non Standard Temperatures / Kinematic Viscosity at 40°C and
Kinematic Viscosity at100°C |
|
ASTM
D471 |
Rubber
Properties - Effects of Liquids |
Effect
of Liquids on Rubber |
|
ASTM
D473 |
Sediment
in Crude Oils and Fuel Oils by the Extraction Method |
Sediment
in Crude Oils and Fuel Oils by Extraction |
|
ASTM
D482 |
Ash
from Petroleum Products |
Ash,
Ash Content |
|
ASTM
D483 |
Unsulfonated
Residue of Petroleum Plant Spray Oils |
Unsulfonated
Residue of Petroleum Plant Spray Oil |
|
ASTM
D524 |
Ramsbottom
Carbon Residue of Petroleum Products |
Ramsbottom
Carbon Residue |
|
ASTM
D566 |
Dropping
Point of Lubricating Grease |
Dropping
Point |
|
ASTM
D611 |
Aniline
Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon
Solvents |
Aniline
Point, Aniline Point of Petroleum Products |
|
ASTM
D613 |
Cetane
Number of Diesel Fuel Oil |
Cetane
No. |
|
ASTM
D664 |
Acid
Number of Petroleum Products by Potentiometric Titration |
TAN,
Total Acid No. |
|
ASTM
D665 |
Rust-Preventing
Characteristics of Inhibited Mineral Oil in the Presence of Water |
Rust
Prevention Characteristics |
|
ASTM
D721 |
Oil
Content of Petroleum Waxes |
Oil
in Wax |
|
ASTM
D808 |
Chlorine
in New and Used Petroleum Products (Bomb Method) |
Chlorine
in Lubricating Oils |
|
ASTM
D874 |
Sulfated
Ash from Lubricating Oils and Additives |
Sulfated
Ash |
|
ASTM
D892 |
Foaming
Characteristics of Lubricating Oils |
Foam |
|
ASTM
D893 |
Insolubles
in Used Lubricating Oils |
Insolubles |
|
ASTM
D924 |
Dissipation
Factor (or Power Factor) and Relative Permittivity (Dielectric Constant)
of Electrical Insulating Liqui |
Test
Method for Dissipation Factor (or Power Factor)
of Electrical Insulating Liquids. |
|
ASTM
D937 |
Cone
Penetration of Petrolatum |
Cone
Penetration of Petrolatum |
|
ASTM
D938 |
Congealing
Point of Petroleum Waxes, including Petrolatum |
Congealing
Point of Wax |
|
ASTM D942 |
Oxidation Stability of Lubricating Grease |
Oxidation Stability |
|
ASTM
D943 |
Oxidation
Characteristics of Inhibited Mineral Oils |
Oxidation |
|
ASTM
D971 |
Test
Method for Interfacial Tension of Oil against Water by Ring Method |
Test
Method for Interfacial Tension of Oil against Water by Ring Method |
|
ASTM
D972 |
Evaporation
Loss of Lubricating Greases and Oils |
Evaporation
Loss of Lubricating Greases and Oils |
|
ASTM
D974 |
Acid
and Base Number by Color-Indicator Titration |
Neutralization
Number Neutralization No.; Acid and Base No. |
|
ASTM
D975 |
Standard
Specification for Diesel Fuel Oils |
Standard
Specification for Diesel Fuel Oils |
|
ASTM
D976 |
Calculated
Cetane Index of Distillate Fuels - requires API Gravity and D86
Distillation |
Calculated
Cetane Index |
|
ASTM
D1067 |
Acidity or Alkalinity of Water |
Acidity or Alkalinity of Water |
|
ASTM D1093 |
Acidity of Distillation Residue or Hydrocarbon
Liquids |
Acidity |
|
ASTM
D1119 |
Percent
Ash Content of Engine Coolants and Antirusts |
Ash
Content of Engine Coolants |
|
ASTM
D1120 |
Boiling
Point of Engine Coolants |
Boiling
Point of Engine Coolants (neat and 50/50 mixture) / Equilibrium Reflux
Boiling Point at atmospheric pressure |
|
ASTM
D1121 |
Reserve
Alkalinity of Engine Coolants and Anti-rust |
Reserve
Alkalinity of Antifreeze, Determination of the Reserve Alkalinity of
Antifreeze |
|
ASTM
D1122 |
Density
or Relative Density of Engine Coolant Concentrates and Engine Coolants By
The Hydrometer |
Specific
Gravity of Engine Coolant Concentrates and Engine Coolants by The
Hydrometer, Specific Gravity of Coolants, Specific Gravity of Antifreeze |
|
ASTM
D1123 |
Water
in Engine Coolant Concentrate by the Karl Fischer Reagent Method |
Water
%: by Karl Fischer Method |
|
ASTM
D1133 |
Kauri-Butanol
Value of Hydrocarbon Solvents |
Kauri
Butanol Value of Hydrocarbon Solvents |
|
ASTM D1159 |
Bromine Number of Petroleum Distillates |
Bromine Number |
|
ASTM
D1160 |
Distillation
of Petroleum Products at Reduced Pressure |
Vacuum
Distillation of Petroleum Products |
|
ASTM
D1177 |
Freezing
Point of Aqueous Engine Coolants |
Refractive
Index and Refractive Dispersion of Hydrocarbon Liquids |
|
ASTM
D1217 |
Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer |
Density and Relative Density (Specific Gravity) of Liquids by Pycnometer |
|
ASTM
D1218 |
Refractive
Index and Refractive Dispersion of Hydrocarbon Liquids |
Refractive
Index and Refractive Dispersion of Hydrocarbon Liquids |
|
ASTM D1263 |
Leakage Tendencies of Automotive Wheel Bearing
Grease |
Wheel Bearing Leakage |
|
ASTM D1264 |
Water Washout Characteristics of Lubricating Grease |
Water Washout |
|
ASTM
D1275 |
Corrosive
Sulfur in Electrical Insulating Oils |
Corrosive
Sulfur in Electrical Insulating Oils |
|
ASTM
D1287 |
The
pH of Engine Coolants and Antirusts |
pH
of Antifreeze |
|
ASTM
D1293 |
pH
of Water |
pH
of Water |
|
ASTM
D1298 |
Density,
Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and
Liquid Petroleum Products by Hydrometer Method |
Density,
Specific Gravity and API Gravity by Hydrometer |
|
ASTM D1310 |
Flash and Fire by TAG Open Cup |
TAG Open Flash and/or Fire |
|
ASTM
D1319 |
Hydrocarbon
Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption |
Hydrocarbon
Types by Fluorescent Indicator Absorption |
|
ASTM
D1321 |
Needle
Penetration of Petroleum Waxes |
Needle
Penetration |
|
ASTM
D1384 |
Corrosion
Test for Engine Coolants in Glassware |
Corrosion
in Glassware |
|
ASTM
D1401 |
Water
Separability of Petroleum Oils and Synthetic Fluid |
Demulsibility |
|
ASTM
D1403 |
Cone
Penetration of Lubricating Grease Using One-Quarter and One-Half Scale
Cone Equipment |
Quarter
Scale Cone Penetration |
|
ASTM D1404 |
Deleterious Particles in Grease |
Grease Contamination |
|
ASTM
D1481 |
Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer |
Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer |
|
ASTM D1492 |
Bromine Index of Aromatic Hydrocarbons |
Bromine Index |
|
ASTM
D1500 |
ASTM
Color of Petroleum Products (ASTM Color Scale) |
Color,
ASTM |
|
ASTM
D1662 |
Standard
Test Method for Active Sulfur in Cutting Oils |
Active
Sulfur in Cutting Oils |
|
ASTM
D1747 |
Refractive
Index of Viscous Materials |
Refractive
Index |
|
ASTM
D1796 |
Water
and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure) |
Water
and Sediment |
|
ASTM D1831 |
Roll Stability of Lubricating Grease |
Roll Stability |
|
ASTM
D1832 |
Peroxide
Number of Petroleum Wax |
Peroxide
No. of Petroleum Wax |
|
ASTM D1833 |
Odor of Petroleum Wax |
Odor of Wax |
|
ASTM
D1835 |
Specifications
for Liquid Petroleum (LP) Gases |
LPG
Specifications, Specifications for Liquid Petroleum Gas (LPG) / Analysis
of Liquified Petroleum Gas (LPG) by Gas Chromatography |
|
ASTM
D1837 |
Volatility
of Liquefied Petroleum (LP) Gases |
Volatility
of LPG / LPG Volatility |
|
ASTM D1840 |
Naphthalene Hydrocarbons in Aviation Turbine Fuel
by UV |
Naphthalene Content |
|
ASTM
D1881 |
Foaming
Tendencies of Engine Coolants in Glassware |
Foaming
Tendencies of Antifreeze |
|
ASTM
D1882 |
Effect
of Cooling System Chemical Solutions on Organic Finishes
for Automotive Vehicles |
Auto
Finish Effect; Surface Finish by Antifreeze |
|
ASTM
D1959 |
Iodine
Value of Drying Oils and Fatty Acids |
Iodine
Value |
|
ASTM
D1980 |
Free Fatty Acids |
Free Fatty Acids |
|
ASTM
D2007 |
Characteristic
Groups in Rubber Extender and Processing Oils and Other Petroleum -
Derived Oils by the Clay-Gel Absorption Chromatographic Method |
Hydrocarbon
Type analysis by Clay-Gel Absorption Chromatography
/ Percent Hydrocarbon / Hydrocarbon Type with Asphalenes /
Hydrocarbon Type with Aromatics recovered |
|
ASTM
D2008 |
Ultraviolet
Absorbance and Absorptivity of Petroleum Products |
Ultraviolet
Absorbance and Absorptivity of Petroleum Products, UV Absorbance and
Absorptivity |
|
ASTM D2112 |
Oxidation Stability of Inhibited Mineral Oils by
Rotating Pressure Vessel |
ROPV |
|
ASTM
D2158 |
Residues
in Liquified Petroleum (LP) Gases |
LPG
Residue, Residues in Liquified Petroleum Gas (LPG) |
|
ASTM
D2161 |
Standard
Practice for Conversion of Kinematic Viscosity to Saybolt Universal
Viscosity or to Saybolt Furol Viscosity |
Conversion
of Kinematic Viscosity to Saybolt Universal of Saybolt Furol |
|
ASTM
D2163 |
Analysis
of Liquified Petroleum (LP) Gases and Propene Concentrates by Gas
Chromatography |
LPG
Composition, (LP) Gases and Propane Concentrates by Gas Chromatography,
Analysis of Liquified Petroleum Gas (LPG) by Gas Chromatography |
|
ASTM
D2265 |
Dropping
Point of Lubricating Grease over Wide Temperature Range |
Dropping
Point of Lubricating Grease over Wide Temperature Range |
|
ASTM
D2266 |
Wear
Preventive Characteristics of Lubricating Grease (Four-Ball Method) |
Four
Ball Wear test for Greases |
|
ASTM D2269 |
Evaluation of White Mineral Oil by UV Absorbtion |
UV Absorbtion |
|
ASTM
D2270 |
Standard
Practice for Calculating Viscosity Index From Kinematic Viscosity at 40
and 100°C |
Calculating
Viscosity Index From Kinematic Viscosity at 40 and 100°C |
|
ASTM
D2272 |
Oxidation
Stability of Steam Turbine Oils by Rotating Pressure Vessel |
Oxidation
Stability of Steam Turbine Oils by Rotating Bomb |
|
ASTM
D2273 |
Trace
Sediment in Lubricating Oils |
Trace
Sediment |
|
ASTM
D2274 |
Oxidation Stability of Distillate Fuel Oil
(Accelerated Method) |
Oxidation Stability of Distillate Fuel Oil
(Accelerated Method) |
|
ASTM
D2386 |
Freezing
Point of Aviation Fuels |
Freeze
Point |
|
ASTM
D2500 |
Cloud
Point of Petroleum Products |
Cloud
Point |
|
ASTM
D2501 |
Calculation
of Viscosity-Gravity Constant (VGC) of Petroleum Oils |
Calculation
of Viscosity Gravity Constant (VGC) of Petroleum Oils |
|
ASTM D2502 |
Estimation
of Molecular Weight (Relative Molecular Mass) of Petroleum Oils From
Viscosity Measurements |
Mol
Weight from Viscosity |
|
ASTM
D2509 |
Measurement
of Load-Carrying Capacity of Lubricating Grease (Timken Method) |
Load
Caring Capacity of Lubricating Greases (Timken Method) |
|
ASTM
D2533 |
Vapor-Liquid
Ratio of Spark-Ignition Engine Fuels |
Vapor-Liquid
Ratio, Vapor Liquid Ratio for Gasoline |
|
ASTM
D2549 |
Separation
of Representative Aromatics and Nonaromatics Fractions of High-Boiling
Oils by Elution Chromatography |
Aromatics,
Aromatics and Non-Aromatics in High Boiling Oils |
|
ASTM
D2570 |
Simulated
Service Corrosion Testing of Engine Coolants |
Simulated
Service of Coolant |
|
ASTM
D2596 |
Measurement
of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method) |
Four
Ball EP Tesing for Greases |
|
ASTM
D2602 |
Hydrolytic
Stability of Hydraulic Fluids (Beverage Bottle Method) [Discontinued 1993,
Replaced by D5293} |
Hydrolytic
Stability (Discontinued) |
|
ASTM
D2619 |
Hydrolytic
Stability of Hydraulic Fluids (Beverage Bottle Method) |
Hydrolytic
Stability |
|
ASTM D2625 |
Endurance Life and Load Capacity of Grease (Pin and
Vee) |
Pin and Vee |
|
ASTM
D2669 |
Viscosity
of Petroleum Waxes Compounded with Additives (Hot Melts) |
Apparent
Viscosity of Petroleum Waxes compounded with additives (hot melt), ASTM
D2669 |
|
ASTM
D2670 |
Wear Properties of Oil (Pin and Vee) |
Oil Pin and Vee |
|
ASTM
D2699 |
Research
Octane Number of Spark-Ignition Engine Fuel |
Research
Octane Number; Research Octane No., Knock Characteristics of Motor Fuel by
Research Method |
|
ASTM
D2700 |
Motor
Octane Number of Spark-Ignition Engine Fuel |
Motor
Octane Number, Motor Octane No., Knock Characteristics of Motor and
Aviation Fuels by Motor Method |
|
ASTM
D2709 |
Water
and Sediment in Middle Distillate Fuels by Centrifuge |
Water
and Sediment in Middle Distillate Fuels by Centrifuge |
|
ASTM
D2710 |
Bromine Index of Petroleum Hydrocarbons |
Bromine Index |
|
ASTM D2711 |
Demulsibility of Lubricating Oils |
Demulsibility |
|
ASTM
D2766 |
Specific
Heat of Liquids and Solids |
Specific
Heat of Liquids and Solids |
|
ASTM
D2782 |
Measurement
of Extreme-Pressure Properties of Lubricating Fluids (Timken Method) |
Timken
EP for Gear Oils |
|
ASTM
D2783 |
Measurement
of Extreme-Pressure Properties of Lubricating Fluids (Four-Ball Method) |
Four
Ball EP for Gear Oils |
|
ASTM
D2809 |
Cavitation
Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With
Engine Coolants |
Cavitation,
Pump Cavitation |
|
ASTM D2878 |
Estimated Apparent Vapor Pressure and Molecular
Weight |
VP and Mol Weight |
|
ASTM
D2879 |
Vapor
Pressure-Temperature Relationship and Initial Decomposition Temperature of
Liquids by Isoteniscope |
Vapor
Pressure-Temperature Relationship and Initial Decomposition Temperature of
Liquids by Isoteniscope, Determination of Pressure by Isoteniscope |
|
ASTM
D2880 |
Specification
for Gas Turbine Fuel Oils |
Specification
for Gas Turbine Fuel Oils |
|
ASTM
D2882 |
Indicating
the Wear Characteristics of Petroleum and Non-Petroleum Hydraulic Fluids
in Constant Volume Vane Pump |
Hydraulic
Pump Test |
|
ASTM
D2887 |
Boiling
Range Distribution of Petroleum Fractions by Gas Chromatography |
Simulated
Distillation (Fuels), Volatility by D2887 (Oils,Crude Oil) |
|
ASTM
D2889 |
Calculation
of True Vapor Pressures of Petroleum Distillate Fuels |
True
Vapor Pressure |
|
ASTM D2892 |
Distillation of Crude Petroleum |
Crude Distillation |
|
ASTM D2893 |
Oxidation Characteristics of EP Lubricating Oils |
EP Oxidation |
|
ASTM D2896 |
Base Number of Petroleum Products by Potentiometric
Perchloric Acid Titration |
TBN; Total Base No., Total Base Number |
|
ASTM
D2982 |
Detecting
Glycol-Base Antifreeze in Used Lubricating Oils |
Glycol
in Oil |
|
ASTM
D2983 |
Method
for Low-Temperature Viscosity of Lubricants Measured by Brookfield
Viscometer / Low-Temperature
Viscosity of Lubricants Measured by Brookfield Viscometer |
Brookfield
Viscosity |
|
ASTM
D3120 |
Trace
Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative
Microcoulometry |
Sulfur,
Sulfur Content by Coulometric Titration / Sulfur Content by Dohrmann |
|
ASTM
D3147 |
Testing
Stop-Leak Additives for Engine Coolants |
Coolant
Stop Leak Test Machine |
|
ASTM D3227 |
Mercaptan Sulfur in Distillate Fuels |
Mercaptan Sulfur |
|
ASTM
D3228 |
Total
Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method |
Kjeldahl
Nitrogen |
|
ASTM
D3230 |
Salts
in Crude Oil (Electrometric Method) |
Salts
in Crude Oil |
|
ASTM
D3233 |
Measurement
of Extreme Pressure Properties of Fluid Lubricants (Falex Pin and Vee
Block Methods) |
Measurement
of Extreme Pressure Properties of Fluid Lubricants (Falex Pin and Vee
Block Methods), Falex EP for Lubricating Oil |
|
ASTM
D3235 |
Solvent
Extractables in Petroleum Waxes |
Solvent
Extractibles from Wax |
|
ASTM D3279 |
n-heptane Insolubles |
Insolubles |
|
ASTM
D3306 |
Standard
Specification for Glycol Base Engine Coolant for Automobile and Light-Duty
Service |
Specification
for Ethylene Glycol Base Engine Coolants |
|
ASTM
D3321 |
Use
of the Refractometer for Field Test Determination of the Freezing Point of
Aqueous Engine Coolants |
Refractive
Index Freezing Point, |
|
ASTM
D3427 |
Air
Release Properties of Petroleum Oils |
Gas
Bubble Separation Time of Petroleum Oils |
|
ASTM
D3524 |
Diesel
Fuel Diluent in Used Diesel Engine Oils by Gas Chromatography |
Fuel
Dilution (Diesel) |
|
ASTM
D3525 |
Gasoline
Diluent in Used Gasoline Engine Oils by Gas Chromatography |
Fuel
Dilution (Gasolline) |
|
ASTM
D3527 |
Life Performance of Wheel Bearing Grease |
Wheel Bearing Life |
|
ASTM
D3606 |
Determination
of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas
Chromatography |
Benzene/Toluene |
|
ASTM
D3634 |
Trace
Chloride Ion in Engine Coolants |
Chloride:
titration, Trace Chloride |
|
ASTM
D3699 |
Standard
Specification for Kerosine |
Kerosene
Specification |
|
ASTM
D3829 |
Predicting
the Borderline Pumping Temperature of Engine Oil |
MRV
20 hr, Mini Rotary Viscosity by the 20hr cycle |
|
ASTM
D3944 |
Solidification
Point of Petroleum Wax |
Solidification
Point of Petroleum Wax |
|
ASTM
D3945 |
Shear
Stability of Polymer-Containing Fluids Using a Diesel Injector Nozzle
(Discontinued 1998 [replaced by ASTM D6278] |
Orbahn
Shear |
|
ASTM
D4006 |
Water
in Crude Oil by Distillation |
Water
in Crude Oil by Distillation |
|
ASTM
D4007 |
Water
and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) |
Water
and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) |
|
ASTM
D4048 |
Copper Corrosion in Lubricating Grease |
Grease Copper Corrosion |
|
ASTM
D4052 |
Density
and Relative Density of Liquids by Digital Density Meter |
Density |
|
ASTM
D4053 |
Benzene
in Motor and Aviation Gasoline by Infrared Spectroscopy |
Benzene
in Motor and Aviation Gasoline by Infrared Spectroscopy, Benzene Content
of Crude Oil |
|
ASTM
D4055 |
Pentane
Insolubles by Membrane Filtration |
Pentane
Insolubles by Membrane Filtration |
|
ASTM
D4172 |
Wear
Preventive Characteristics of Lubricating Fluid (Four Ball Method) |
Four
Ball Wear Test, Four Ball Wear for Gear Oils |
|
ASTM
D4176 |
Free Water and Particulate Contamination of
Distillate Fuels |
Water and Sediment |
|
ASTM
D4294 |
Sulfur
in Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectroscopy |
Sulfur
by X-Ray |
|
ASTM D4310 |
Determination
of the Sludging and Corrosion Tendencies of Inhibited Mineral Oils
|
Determination
of the Sludging and Corrosion Tendencies of Inhibited Mineral Oils
|
