|
Deutsches
Institut fur Normung - DIN © Standardization Methods
To
Search Pages: under your computer's tool bar
Edit
scroll down to
Find
|
DIN
- Method |
DIN
- Method Description |
Common
Reference |
|
DIN
51376 |
Flash
and Fire Points by Cleveland Open Cup Tester |
Flash
and Fire, COC |
|
DIN
51381 01-Dec-1988 |
Testing
of lubricating oils, governor oils and hydraulik fluids; determination of
air release properties |
Gas
Bubble Separation Time of Petroleum Oils |
|
DIN
51398 01-Jul-1983 |
Testing
of lubricants; procedure for measurement of low temperature apparent
viscosity by means of the Brookfield viscometer (liquid bath method) |
Brookfield
Viscosity |
|
DIN
51411 01-Jul-1977 |
Testing
of liquid mineral oil hydrocarbons; determination of Saybolt colour |
ASTM
Color of Petroleum Porducts |
|
DIN
51551-1 01-Apr-1993 |
Testing
of lubricants and liquid fuels; determination of the carbon residue;
Conradson method |
Conradson
Carbon; Conradson Carbon Residue |
|
DIN
51559-1 |
Testing
of mineral oils; determination of the saponification number,
saponification numbers above 2, colorindicator titration |
Saponification
Number |
|
DIN
51559-2 |
Testing
of mineral oils; determination of saponification number; color-indicator
titration, insulating oils |
Saponification
Number |
|
DIN
51561 |
Kinematic
Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic
Viscosity) |
Determination
of Viscosity |
|
DIN
51575 |
Testing
of petroleum products; determination of sulfated ash |
Ash
Content, Sulfated Ash, Sulfated Ash from Lubricating Oils and Additives |
|
DIN
51579 01-May-1965 |
Testing
of Paraffin; Determination of Needle Penetration |
Needle
Penetration of Petroleum Waxes |
|
DIN
51580 01-Apr-1989 |
Testing
of petroleum waxes; determination of cone penetration |
Full
Scale Cone Penetration |
|
DIN
51585 |
Rust-Preventing
Characteristics of Inhibited Mineral Oil in the Presence of Water |
Rust
Prevention Characteristics |
|
DIN
51587 01-Aug-1974 |
Testing
of Lubricants; Determination of the Ageing Behaviour of Steam Turbine Oils
and Hydraulic Oils Containing Additives |
Oxidation
Characteristics of Inhibited Mineral Oil, 2000 hrs |
|
DIN
51595 01-Nov-2000 |
Testing
of petroleum products - Determination of the content of asphaltenes -
Precipitation with heptane |
Determination
of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroeum
Products |
|
DIN
51597 |
Cloud
Point of Petroleum Products |
Cloud
Point |
|
DIN
51599 |
Water
Separability of Petroleum Oils and Synthetic Fluid |
Water
Separability of Petroleum Oils |
|
DIN
51751 |
Distillation
of Petroleum Products at Atmospheric Pressure |
Atmospheric
Distillation |
|
DIN
51757 01-Apr-1994 |
Testing
of mineral oils and related materials; determination of density |
API
Gravity, Specific Gravity, Density |
|
DIN
51758 |
Flash-Point
by Pensky-Martens Closed Cup Tester |
Flash
Point, PM |
|
DIN
51570 |
Melting
Point of Petroleum Wax (Cooling Curve) |
Melting
Point of Wax |
|
DIN
51775 |
Aniline
Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon
Solvents |
Aniline
Point of Petroleum Products |
|
DIN
51789 |
Sediment
in Crude Oils and Fuel Oils by the Extraction Method |
Sediment
in Crude Oils and Fuel Oils by the Extraction Method |
|
DIN
51793 01-Jul-1971 |
Testing
of Liquid Fuels; Determination of Water Content and Sediments in Fuel Oils
and Crude Oils; Centrifuge Method |
Insolubles
in Used Lubricating Oil |
|
DIN
51803 |
Base
Number of Petroleum Products by Potentiometric Perchloric Acid Titration |
Total
Base Number, TBN |
|
DIN
51804 |
Cone
Penetration of Lubricating Grease Using One-Quarter and One-Half Scale
Cone Equipment |
Cone
Penetration of Lubricating Grease |
|
DIN
51809 |
Acid
Number of Petroleum Products by Potentiometric Titration |
Total
Acid Number, TAN |
|
DIN
51811 01-Sep-1991 |
Testing
of lubricants; testing of corrosiveness to copper of greases; copper strip
tarnish test |
Detection
of Copper Corrosion from Petroleum Products by the Copper Strip Tarnish
Test |
|
DIN
52048 |
Water
in Petroleum Products and Bituminous Materials by Distillation |
Water
Content by Distillation |
Go
to Top of Page
To
Search Pages: under your computer's tool bar
Edit
scroll down to
Find
Deutsches
Institut fur Normung - DIN © Standardization Methods
DIN is a non-governmental organization established to promote
the development of standardization and related activities in
Germany
and related markets with the goal of facilitating the international exchange of
goods and services, and to developing cooperation in the spheres of
intellectual, scientific, technological and economic activity. Through the
European standards organizations CEN and CENELEC, DIN also presents the German
view in the development of the European standards which are critical to
completion of the single European market.
Over 12,000 DIN standards cover a wide range of topics including: physical
quantities and units, fasteners, water analysis, building and civil engineering
(including building materials, construction contract procedures (VOB), soil
testing, corrosion protection of steel structures), materials testing (testing
machines, plastics, rubber, petroleum products, semiconductors), steel pipes,
machine tools, twist drills, roller and ball bearings, and process engineering.
DIN Handbooks (covering subjects such as mechanical engineering, fasteners,
steel, steel pipes, and welding), and most DIN standards are available as
English versions, or as English translations.
Copyright © 2003 Techstreet
Just ask – We Test IT!
[<<<<<----click
to quickly go to our Email]
Go
to Top of Page
Go to:
MASTER
TEST LIST -- All Tests listed
Go
to Home Page
Our
laboratory uses the methods and standards of this organization
and/or
established industry standards.
|
