|
Method
|
Official
Description |
Common
Reference |
|
21
CFR 172.880(b) |
TITLE 21--FOOD AND DRUGS CHAPTER I--FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF
HEALTH AND HUMAN SERVICES
SUBCHAPTER B--FOOD FOR HUMAN CONSUMPTION (CONTINUED)
PART 172--FOOD ADDITIVES PERMITTED FOR DIRECT ADDITION TO FOOD FOR
HUMAN CONSUMPTION
Subpart I--Multipurpose Additives
880 - Petrolatum.
(b) Petrolatum meets the following ultraviolet absorbance limits
. . . |
FDA - UV Absorbance Limits of Petrolatum |
|
21
CFR 172.886
[analysis performed see below] |
TITLE 21--FOOD AND DRUGS
CHAPTER I--FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND
HUMAN SERVICES
SUBCHAPTER B--FOOD FOR HUMAN CONSUMPTION (CONTINUED
PART 172--FOOD ADDITIVES PERMITTED FOR DIRECT ADDITION TO FOOD FOR
HUMAN CONSUMPTION
Subpart I--Multipurpose Additives
886 - Petrolatum Wax. |
FDA
- Limits of Petrolatum Wax |
|
21
CFR 172.886(b)
|
(b)
Petroleum wax meets the following ultraviolet absorbance limits . .
. |
FDA
- Limits of Petrolatum Wax 21
CFR 172.886(b)
Part 1
|
|
21
CFR 172.886(b)
|
(b)
Petroleum wax meets the following ultraviolet absorbance limits . .
. |
FDA
- Limits of Petrolatum Wax 21
CFR 172.886(b)
Part 2
|
|
21
CFR 178.3620
[analysis performed see below]
|
TITLE 21--FOOD AND DRUGS
CHAPTER I--FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND
HUMAN SERVICES
SUBCHAPTER B--FOOD FOR HUMAN CONSUMPTION (CONTINUED
PART 178-- INDIRECT FOOD ADDITIVES: ADJUVANTS, PRODUCTION AIDS, AND
SANITIZERSSubpart D--Certain Adjuvants and Production Aids
3620 - Mineral oil |
FDA
Limits for Mineral Oil
|
|
21CFR178.3620(b) |
Technical
white mineral oil
|
21CFR178-3620 Part B FDA
Limits for Technical
white mineral oil - Part B
|
|
21CFR178.3620(b)
(1) |
Technical white mineral oil consists of specially refined distillates of
virgin petroleum or of specially refined distillates that are produced
synthetically from petroleum gases. Technical white
mineral oil meets the following specifications:
(i) Saybolt color . . .
(ii) Ultraviolet Absorbance limits . . . |
(i)
FDA Color - Technical White
Mineral Oil
(ii) FDA UV Absorbance Limits of Technical White Mineral Oil |
|
21CFR178.3620(b)
(1)(i) |
(i)
Saybolt color |
FDA Saybolt color - Technical white mineral oil |
|
21CFR178.3620(b)
(1)(ii) |
(ii)
Ultraviolet Absorbance limits . . . |
ii) FDA - Technical White Mineral Oil
- UV Absorbance Limits |
|
21
CFR 178.3620 (c) |
Mineral Oil . . . |
21CFR178-3620 Part C
FDA
Limits for mineral oil
- Part C |
| 21CFR178.3620(c)(1) |
The mineral oil consists of
virgin petroleum distillates refined to meet the following specifications .
. . |
FDA - Limits for mineral oil
|
| 21CFR178.3620(c)(1)(i) |
(i) Initial
Boiling Point
. . .
|
FDA - Initial Boiling Point of Mineral
Oil |
| 21CFR178.3620(c)(1)(ii) |
(ii) Color
|
FDA - Color of Mineral Oil (ASTM Color
Scale) |
| 21CFR178.3620(c) (1)(iii) |
(iii) Ultraviolet Absorbance
Limits of
Mineral Oil
|
FDA - UV Absorbance
Limits of Mineral
Oil |
| 21CFR178.3650
[analysis performed see below]
|
TITLE 21--FOOD AND DRUGS
CHAPTER I--FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN
SERVICES
SUBCHAPTER B--FOOD FOR HUMAN CONSUMPTION (CONTINUED
PART 178-- INDIRECT FOOD ADDITIVES: ADJUVANTS, PRODUCTION AIDS, AND
SANITIZERSSubpart D--Certain Adjuvants and Production Aids
3650 - Odorless light petroleum hydrocarbons. |
FDA
Limits for odorless light petroleum hydrocarbons |
| 21CFR178.3650(b) |
The additive meets the following
specifications . . . |
21CFR178.3650(b) -
Part B FDA
Limits for odorless
light petroleum hydrocarbons |
| 21CFR178.3650(b)(1) |
Odor |
FDA Odor - Odorless light petroleum
hydrocarbons |
| 21CFR178.3650(b)(2) |
Initial boiling point |
FDA Initial boiling point - Odorless
light petroleum hydrocarbons |
| 21CFR178.3650(b)(3) |
Final boiling point |
FDA Final boiling point - Odorless
light petroleum hydrocarbons |
| 21CFR178.3650(b)(4) |
Ultraviolet Absorbance
Limits
|
FDA Ultraviolet Absorbance
Limits of Odorless light
petroleum hydrocarbons |
|
21
CFR 172.880(b) |
FOOD
AND DRUGS
CHAPTER I--FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND
HUMAN
PART 172--FOOD ADDITIVES PERMITTED FOR DIRECT ADDITION TO FOOD FOR
HUMAN CONSUMPTION
880 - FDA
approval for Petrolatum for use in or on food.
(b) Ultraviolet Absorbance of Petrolatum |
FDA
approval for Petrolatum, Petrolatum Wax for use in or on food.
UV Absorbance of Petrolatum |
|
21
CFR 172.886
[analysis performed see below] |
FOOD
AND DRUGS
CHAPTER I--FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND
HUMAN
PART 172--FOOD ADDITIVES PERMITTED FOR DIRECT ADDITION TO FOOD FOR
HUMAN CONSUMPTION
886 - FDA
approval for Petrolatum Wax for use in or on food.
(b) Ultraviolet Absorbance of Petrolatum Wax |
FDA
approval for Petrolatum, Petrolatum Wax for use in or on food.
UV Absorbance of Petrolatum Wax |
|
21
CFR 172.886(b)
Part 1
|
(b)
Ultraviolet Absorbance of Petrolatum Wax |
FDA
approval for food contacting use of Petroleum
wax, 21CFR172.886,
Part 1
|
|
21
CFR 172.886(b)
Part 2
|
(b)
Ultraviolet Absorbance of Petrolatum Wax |
FDA
approval for food contacting use of Petroleum
wax, 21CFR172-886,
Part 2
|
|
21
CFR 178.3620
[analysis performed see below]
|
FOOD
AND DRUGS
CHAPTER I--FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND
HUMAN SERVICES
PART 178--
3620 - Mineral oil |
21CFR178-3620 Part B, indirect Food Additive Analysis
FDA
approval for Mineral Oil -- FDA, Part B
|
|
21CFR178.3620(b) |
Technical
white mineral oil
|
|
|
21CFR178.3620(b)
(1) |
Technical
white mineral oil consists of specially refined distillates of virgin
petroleum or of specially refined distillates that are produced
synthetically from petroleum gases.
(i) Saybolt color
(ii) Ultraviolet Absorbance of Mineral Oil |
(i)
[ Color of Technical White Mineral Oil]
(ii) UV Absorbance of Technical White Mineral Oil] |
|
21CFR178.3620(b)
(1)(i) |
(i)
Saybolt color |
[Color
of Technical White Mineral Oil] |
|
21CFR178.3620(b)
(1)(ii) |
(ii)
Ultraviolet Absorbance of Mineral Oil |
[UV
Absorbance of Technical White Mineral Oil] |
|
21
CFR 178.3620 (c) |
FDA
approval for Mineral Oil -- FDA, Part C |
21CFR178-3620 Part C, indirect Food Additive Analysis |
| 21
CFR 178.3620(c) |
Mineral oil
|
Mineral oil
|
| 21CFR178.3620(c)(1) |
The mineral oil consists of
virgin petroleum distillates |
The mineral oil consists of
virgin petroleum distillates |
| 21CFR178.3620(c)(1)(i) |
(i) Initial
Boiling Point
|
Initial Boiling Point of Mineral
Oil |
| 21CFR178.3620(c)(1)(ii) |
(ii) Color
[ASTM Color of Petroleum Products
|
Color of Mineral Oil (ASTM Color
Scale) |
| 21CFR178.3620(c) (1)(iii) |
(iii) Ultraviolet Absorbance of
Mineral Oil
|
UV Absorbance of Mineral
Oil |
| 21CFR178.3650
[analysis performed see below]
|
FOOD AND DRUGS
CHAPTER I--FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND
HUMAN SERVICES
PART 178--
3650 - Odorless light petroleum hydrocarbons |
21CFR178-3650 Indirect Food Additive Analysis
/ Odorless light petroleum hydrocarbons
FDA
approval for Odorless light petroleum hydrocarbons |
| 21CFR178.3650(b) |
The additive meets the following
specifications(1) Odor (2) Initial boiling
point (3) Final boiling point |
21CFR178.3650(b) -
FDA, Part B |
| 21CFR178.3650(b)(1) |
Odor |
Odor - Odorless light petroleum
hydrocarbons |
| 21CFR178.3650(b)(2) |
Initial boiling point |
Initial boiling point - Odorless
light petroleum hydrocarbons |
| 21CFR178.3650(b)(3) |
Final boiling point |
Final boiling point - Odorless
light petroleum hydrocarbons |
|
|
Nat’l
Highway Traffic Safety Admin § 571.116 Standard No. 116; Motor vehicle
brake fluids. S1. Scope. This standard specifies requirements for
fluids for use in hydraulic brake systems of motor vehicles, containers
for these fluids, and labeling of the containers. |
Nat’l
Highway Traffic Safety Admin § 571.116 Standard No. 116; Motor vehicle
brake fluids. S1. Scope. This standard specifies requirements for
fluids for use in hydraulic brake systems of motor vehicles, containers
for these fluids, and labeling of the containers. |
|
49
CFR 571.116 6.1 |
S6.1
Equilibrium reflux boiling point. Determine the ERBP of a brake
fluid testing of Brake Fluid, Equilibrium Reflux Boiling Point, ERBP |
Equilibrium
Reflux Boiling Point |
|
49
CFR 571.116 6.2 |
National
Highway Traffic Safety Administration DOT testing of Brake Fluid, ERBP -
Equilibrium Reflux Boiling Point-Wet
S6.2 Wet ERBP. Determine the wet
ERBP of a brake fluid
|
Equilibrium
Reflux Boiling Point - Wet |
|
49
CFR 571.116 6.3 |
Department
of Transporation DOT testing of Brake Fluid,
Vis @ 100°C
S6.3 Kinematic viscosities. Determine the kinematic viscosity of a
brake fluid in mm 2 /s |
Kinematic
Viscosity @ 100°C |
|
49
CFR 571.116 6.3 |
Department
of Transporation DOT testing of Brake Fluid,
Vis @ -40°C
S6.3 Kinematic viscosities. Determine the kinematic viscosity of a
brake fluid in mm 2 /s |
Kinematic
Viscosity @ -40°C |
|
49
CFR 571.116 6.8 |
Dept.
of Trans. testing of Brake Fluid, Evaporation Loss
S6.8 Evaporation. The Evaporation Loss |
Evaporation
Loss of Brake Fluid |
|
AOAC
955.01 |
Calcium
Carbonate Equivalence (CCE) - (Neutralizing Value of Liming Materials) |
Calcium
Carbonate Equivalence (CCE), Calcium Carbonate Equivalence by AOAC |
|
AOAC
978.18 |
Water
Activity of Preserved Food |
Water
Activity of Preserved Food |
|
ASTM
C117 |
Determination
of Materials Finer than 75um (no. 200) Sieve in Mineral Aggregates by
Washing |
Mineral
Aggregates by Washing |
|
ASTM
C136 |
Sieve
Analysis of Course and Fine Aggregates |
Sieve
Analysis of Fine and Coarse Aggregates |
|
ASTM
C566 |
Total
Evaporable Moisture Content of Aggregate by Drying |
Moisture
Content of Aggregate by Drying |
|
ASTM
D56 |
Flash
Point by Tag Closed Tester |
Tag
Closed Cup Flash |
|
ASTM
D86 |
Distillation
of Petroleum Products at Atmospheric Pressure |
Atmospheric
Distillation of Petroleum Products (Gasoline) (Fuel Oils) |
|
ASTM
D87 |
Melting
Point of Petroleum Wax (Cooling Curve) |
Melting
Point of Wax |
|
ASTM
D91 |
Precipitation
Number of Lubricating Oils |
Precipitation
Number of Lubricating Oils |
|
ASTM
D92 |
Flash
and Fire Points by Cleveland Open Cup Tester |
Flash
Point, COC / Fire Point. COC |
|
ASTM
D93 |
Flash-Point
by Pensky-Martens Closed Cup Tester |
Pensky-Marten
Flash Point, Flash Point PM / Pensky-Marten Fire Point, Fire Point PM |
|
ASTM
D94 |
Saponification
Number of Petroleum Products |
Saponification
Number of Petroleum Products |
|
ASTM
D95 |
Water
in Petroleum Products and Bituminous Materials by Distillation |
Water
by Distillation, Water Content by Distillation |
|
ASTM
D96 |
Test
Methods for Water and Sediment in Crude Oil by Centrifuge Method (Field
Procedure) |
Percent
Sediment, Brine, Sediment and Water |
|
ASTM
D97 |
Pour
Point of Petroleum Products |
Pour
Point - Fuels / Pour Point -
Oils |
|
ASTM
D127 |
Drop
Melting Point of Petroleum Wax including Petrolatum |
Drop
Melting Point, Melting Point of Wax, Dropping Point |
|
ASTM
D128 |
Analysis
of Lubricating Grease |
Analysis
of Lubricating Grease |
|
ASTM
D129 |
Sulfur
in Petroleum Product (General Bomb Method) |
Sulfur
in Petroleum Product (General Bomb Method) |
|
ASTM
D130 |
Detection
of Copper Corrosion from Petroleum Products by the Copper Strip Tarnish
Test |
Copper
Corrosion |
|
ASTM
D156 |
Saybolt
Color of Petroleum Products (Saybolt Chromometer Method) |
Color-Saybolt;
Saybolt Color, Color by Saybolt method |
|
ASTM
D189 |
Conradson
Carbon Residue of Petroleum Products |
Conradson
Carbon; Conradson Carbon Residue |
|
ASTM
D217 |
Cone
Penetration of Lubricating Grease |
Full
Scale Cone Penetration |
|
ASTM
D240 |
Heat
of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter |
Heat
of Combustion of Liquid Hydrocarbon Fuels |
|
ASTM
D287 |
API
Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method) |
API
Gravity, Specific Gravity, Density |
|
ASTM
D322 |
Gasoline
Diluent in Used Gasoline Engine Oils by Distillation |
Fuel
Dilution by Distillation |
|
ASTM
D323 |
Vapor
Pressure of Petroleum Products (Reid Method) |
Reid
Vapor Pressure |
|
ASTM
D381 |
Gum
Content in Fuels by Jet Evaporation |
Gum
Content in Fuels by Jet Evaporation |
|
ASTM
D396 |
Standard
Specification for Fuel Oils |
Fuel
Oils Specification |
|
ASTM
D439 |
Specification
for Automotive Spark-Ignition Engine Fuel [Replaced ASTM D439 with ASTM
D4814] |
Anti-Knock
Index (R+M)/2 Octane |
|
ASTM
D445 |
Kinematic
Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic
Viscosity) |
Kinematic
Viscosity at Non Standard Temperatures / Kinematic Viscosity at 40°C and
Kinematic Viscosity at100°C |
|
ASTM
D471 |
Rubber
Properties - Effects of Liquids |
Effect
of Liquids on Rubber |
|
ASTM
D473 |
Sediment
in Crude Oils and Fuel Oils by the Extraction Method |
Sediment
in Crude Oils and Fuel Oils by Extraction |
|
ASTM
D482 |
Ash
from Petroleum Products |
Ash,
Ash Content |
|
ASTM
D483 |
Unsulfonated
Residue of Petroleum Plant Spray Oils |
Unsulfonated
Residue of Petroleum Plant Spray Oil |
|
ASTM
D524 |
Ramsbottom
Carbon Residue of Petroleum Products |
Ramsbottom
Carbon Residue |
|
ASTM
D525 |
Oxidation
Stability of Gasoline (Induction Period Method) |
Oxidation
Stability |
|
ASTM
D566 |
Dropping
Point of Lubricating Grease |
Dropping
Point |
|
ASTM
D611 |
Aniline
Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon
Solvents |
Aniline
Point, Aniline Point of Petroleum Products |
|
ASTM
D613 |
Cetane
Number of Diesel Fuel Oil |
Cetane
No. |
|
ASTM
D664 |
Acid
Number of Petroleum Products by Potentiometric Titration |
TAN,
Total Acid No. |
|
ASTM
D665 |
Rust-Preventing
Characteristics of Inhibited Mineral Oil in the Presence of Water |
Rust
Prevention Characteristics |
|
ASTM
D721 |
Oil
Content of Petroleum Waxes |
Oil
in Wax |
|
ASTM
D808 |
Chlorine
in New and Used Petroleum Products (Bomb Method) |
Chlorine
in Lubricating Oils |
|
ASTM
D854 |
Specific
Gravity of Soil Solids by Water Pycnometer |
Specific
Gravity of Soils |
|
ASTM
D874 |
Sulfated
Ash from Lubricating Oils and Additives |
Sulfated
Ash |
|
ASTM
D892 |
Foaming
Characteristics of Lubricating Oils |
Foam |
|
ASTM
D893 |
Insolubles
in Used Lubricating Oils |
Insolubles |
|
ASTM
D924 |
Dissipation
Factor (or Power Factor) and Relative Permittivity (Dielectric Constant)
of Electrical Insulating Liqui |
Test
Method for Dissipation Factor (or Power Factor)
of Electrical Insulating Liquids. |
|
ASTM
D937 |
Cone
Penetration of Petrolatum |
Cone
Penetration of Petrolatum |
|
ASTM
D938 |
Congealing
Point of Petroleum Waxes, including Petrolatum |
Congealing
Point of Wax |
|
ASTM
D943 |
Oxidation
Characteristics of Inhibited Mineral Oils |
Oxidation |
|
ASTM
D971 |
Test
Method for Interfacial Tension of Oil against Water by Ring Method |
Test
Method for Interfacial Tension of Oil against Water by Ring Method |
|
ASTM
D972 |
Evaporation
Loss of Lubricating Greases and Oils |
Evaporation
Loss of Lubricating Greases and Oils |
|
ASTM
D974 |
Acid
and Base Number by Color-Indicator Titration |
Neutralization
Number Neutralization No.; Acid and Base No. |
|
ASTM
D975 |
Standard
Specification for Diesel Fuel Oils |
Standard
Specification for Diesel Fuel Oils |
|
ASTM
D976 |
Calculated
Cetane Index of Distillate Fuels - requires API Gravity and D86
Distillation |
Calculated
Cetane Index |
|
ASTM
D1067 |
Acidity or Alkalinity of Water |
Acidity or Alkalinity of Water |
|
ASTM
D1119 |
Percent
Ash Content of Engine Coolants and Antirusts |
Ash
Content of Engine Coolants |
|
ASTM
D1120 |
Boiling
Point of Engine Coolants |
Boiling
Point of Engine Coolants (neat and 50/50 mixture) / Equilibrium Reflux
Boiling Point at atmospheric pressure |
|
ASTM
D1121 |
Reserve
Alkalinity of Engine Coolants and Anti-rust |
Reserve
Alkalinity of Antifreeze, Determination of the Reserve Alkalinity of
Antifreeze |
|
ASTM
D1122 |
Density
or Relative Density of Engine Coolant Concentrates and Engine Coolants By
The Hydrometer |
Specific
Gravity of Engine Coolant Concentrates and Engine Coolants by The
Hydrometer, Specific Gravity of Coolants, Specific Gravity of Antifreeze |
|
ASTM
D1123 |
Water
in Engine Coolant Concentrate by the Karl Fischer Reagent Method |
Water
%: by Karl Fischer Method |
|
|
Hardness
in Water |
Hardness
in Water |
|
ASTM
D1133 |
Kauri-Butanol
Value of Hydrocarbon Solvents |
Kauri
Butanol Value of Hydrocarbon Solvents |
|
ASTM
D1160 |
Distillation
of Petroleum Products at Reduced Pressure |
Vacuum
Distillation of Petroleum Products |
|
ASTM
D1177 |
Freezing
Point of Aqueous Engine Coolants |
Refractive
Index and Refractive Dispersion of Hydrocarbon Liquids |
|
ASTM
D1217 |
Density
and Relative Density (Specific Gravity) of Liquids by Bingham
Pycnometer |
Density
and Relative Density (Specific Gravity) of Liquids by Pycnometer |
|
ASTM
D1218 |
Refractive
Index and Refractive Dispersion of Hydrocarbon Liquids |
Refractive
Index and Refractive Dispersion of Hydrocarbon Liquids |
|
ASTM
D1275 |
Corrosive
Sulfur in Electrical Insulating Oils |
Corrosive
Sulfur in Electrical Insulating Oils |
|
ASTM
D1287 |
The
pH of Engine Coolants and Antirusts |
pH
of Antifreeze |
|
ASTM
D1293 |
pH
of Water |
pH
of Water |
|
ASTM
D1298 |
Density,
Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and
Liquid Petroleum Products by Hydrometer Method |
Density,
Specific Gravity and API Gravity by Hydrometer |
|
ASTM
D1310 |
Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus |
Tag
Open Cup |
|
ASTM
D1319 |
Hydrocarbon
Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption |
Hydrocarbon
Types by Fluorescent Indicator Absorption |
|
ASTM
D1321 |
Needle
Penetration of Petroleum Waxes |
Needle
Penetration |
| ASTM D1353 |
Nonvolatile Matter in Volatile
Solvents for Use in Paint, Varnish, Lacquer, and Related Products
|
Nonvolatile Matter in Volatile
Solvents for Use in Paint, Varnish, Lacquer, and Related Products
|
|
ASTM
D1384 |
Corrosion
Test for Engine Coolants in Glassware |
Corrosion
in Glassware |
|
ASTM
D1401 |
Water
Separability of Petroleum Oils and Synthetic Fluid |
Demulsibility |
|
ASTM
D1403 |
Cone
Penetration of Lubricating Grease Using One-Quarter and One-Half Scale
Cone Equipment |
Quarter
Scale Cone Penetration |
|
ASTM
D1480 |
Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer |
Density and Relative Density (Specific Gravity) of Viscous Materials by
Pycnometer |
|
ASTM
D1481 |
Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer |
Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer |
|
ASTM
D1500 |
ASTM
Color of Petroleum Products (ASTM Color Scale) |
Color,
ASTM |
|
ASTM
D1662 |
Standard
Test Method for Active Sulfur in Cutting Oils |
Active
Sulfur in Cutting Oils |
|
ASTM
D1747 |
Refractive
Index of Viscous Materials |
Refractive
Index |
|
ASTM
D1796 |
Water
and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure) |
Water
and Sediment |
|
ASTM
D1832 |
Peroxide
Number of Petroleum Wax |
Peroxide
No. of Petroleum Wax |
|
ASTM
D1835 |
Specifications
for Liquid Petroleum (LP) Gases |
LPG
Specifications, Specifications for Liquid Petroleum Gas (LPG) / Analysis
of Liquified Petroleum Gas (LPG) by Gas Chromatography |
|
ASTM
D1837 |
Volatility
of Liquefied Petroleum (LP) Gases |
Volatility
of LPG / LPG Volatility |
|
ASTM
D1881 |
Foaming
Tendencies of Engine Coolants in Glassware |
Foaming
Tendencies of Antifreeze |
|
ASTM
D1882 |
Effect
of Cooling System Chemical Solutions on Organic Finishes
for Automotive Vehicles |
Auto
Finish Effect; Surface Finish by Antifreeze |
|
ASTM
D1959 |
Iodine
Value of Drying Oils and Fatty Acids |
Iodine
Value |
|
ASTM
D2007 |
Characteristic
Groups in Rubber Extender and Processing Oils and Other Petroleum -
Derived Oils by the Clay-Gel Absorption Chromatographic Method |
Hydrocarbon
Type analysis by Clay-Gel Absorption Chromatography
/ Percent Hydrocarbon / Hydrocarbon Type with Asphalenes /
Hydrocarbon Type with Aromatics recovered |
|
ASTM
D2008 |
Ultraviolet
Absorbance and Absorptivity of Petroleum Products |
Ultraviolet
Absorbance and Absorptivity of Petroleum Products, UV Absorbance and
Absorptivity |
|
ASTM
D2158 |
Residues
in Liquified Petroleum (LP) Gases |
LPG
Residue, Residues in Liquified Petroleum Gas (LPG) |
|
ASTM
D2161 |
Standard
Practice for Conversion of Kinematic Viscosity to Saybolt Universal
Viscosity or to Saybolt Furol Viscosity |
Conversion
of Kinematic Viscosity to Saybolt Universal of Saybolt Furol, SUS |
|
ASTM
D2163 |
Analysis
of Liquified Petroleum (LP) Gases and Propene Concentrates by Gas
Chromatography |
LPG
Composition, (LP) Gases and Propane Concentrates by Gas Chromatography,
Analysis of Liquified Petroleum Gas (LPG) by Gas Chromatography |
|
ASTM
D2257 |
Extractable
Matter in Textiles |
Extractable
Matter in Textiles |
|
ASTM
D2265 |
Dropping
Point of Lubricating Grease over Wide Temperature Range |
Dropping
Point of Lubricating Grease over Wide Temperature Range |
|
ASTM
D2266 |
Wear
Preventive Characteristics of Lubricating Grease (Four-Ball Method) |
Four
Ball Wear test for Greases |
|
ASTM
D2270 |
Standard
Practice for Calculating Viscosity Index From Kinematic Viscosity at 40
and 100°C |
Calculating
Viscosity Index From Kinematic Viscosity at 40 and 100°C |
|
ASTM
D2272 |
Oxidation
Stability of Steam Turbine Oils by Rotating Pressure Vessel |
Oxidation
Stability of Steam Turbine Oils by Rotating Bomb |
|
ASTM
D2273 |
Trace
Sediment in Lubricating Oils |
Trace
Sediment |
|
ASTM
D2274 |
Oxidation
Stability of Distillate Fuel Oil (Accelerated Method) |
Oxidation
Stability of Distillate Fuel Oil (Accelerated Method) |
|
ASTM
D2386 |
Freezing
Point of Aviation Fuels |
Freeze
Point |
|
ASTM
D2500 |
Cloud
Point of Petroleum Products |
Cloud
Point |
|
ASTM
D2501 |
Calculation
of Viscosity-Gravity Constant (VGC) of Petroleum Oils |
Calculation
of Viscosity Gravity Constant (VGC) of Petroleum Oils |
|
|
Estimation
of Molecular Weight (Relative Molecular Mass) of Petroleum Oils From
Viscosity Measurements |
Mol
Weight from Viscosity |
|
ASTM
D2509 |
Measurement
of Load-Carrying Capacity of Lubricating Grease (Timken Method) |
Load
Caring Capacity of Lubricating Greases (Timken Method) |
|
ASTM
D2533 |
Vapor-Liquid
Ratio of Spark-Ignition Engine Fuels |
Vapor-Liquid
Ratio, Vapor Liquid Ratio for Gasoline |
|
ASTM
D2549 |
Separation
of Representative Aromatics and Nonaromatics Fractions of High-Boiling
Oils by Elution Chromatography |
Aromatics,
Aromatics and Non-Aromatics in High Boiling Oils |
|
ASTM
D2570 |
Simulated
Service Corrosion Testing of Engine Coolants |
Simulated
Service of Coolant |
|
ASTM
D2596 |
Measurement
of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method) |
Four
Ball EP Tesing for Greases |
|
ASTM
D2602 |
Hydrolytic
Stability of Hydraulic Fluids (Beverage Bottle Method) [Discontinued 1993,
Replaced by D5293} |
Hydrolytic
Stability (Discontinued) |
|
ASTM
D2619 |
Hydrolytic
Stability of Hydraulic Fluids (Beverage Bottle Method) |
Hydrolytic
Stability |
|
ASTM
D2669 |
Viscosity
of Petroleum Waxes Compounded with Additives (Hot Melts) |
